Add:Room506、507、88 Nanxijiang Road,Wuzhong District, Suzhou City ,China
Tel:+86-512-66267500
Fax:+86-512-66262500
Mobile:+86-15995883441
SWC(Sea-water Composite)Desalination membrane elements can be prepared from seawater, SWC membrane components are made of advanced polymer synthesis techniques, high desalination rate and high water yield can be achieved simultaneously, more efficient use of abundant sea water resources. produce drinking water and use it for other purposes to alleviate water shortages.
Features1.SWC4+/SWC4 membrane element is a high boron removal seawater desalination composite membrane, in order to further reduce the energy consumption of seawater desalination system,it also makes use of the new automatic film rolling technology,increase the effective area of seawater desalination membrane element by 10%,make MAX membrane of various types of seawater desalination membrane to provide customers with better cost-effective seawater desalination products.
2.Hydranautics brand seawater desalination film takes the leading position in boron removal, it has a high removal rate of over 91%, among them, the removal rate of boron element by SWC4B under standard test conditions was up to 95%, which was the highest in reverse osmosis membrane in the world.
Technical
Mode |
SWC4+ |
SWC4B |
SWC5 |
SWC5-LD |
SWC5 MAX |
SWC6 |
SWC5-4040 |
|
type |
size |
8-inch |
4-nch |
|||||
membrane material |
Aromatic polyamide composite material |
|||||||
Membrane active area (m2) |
37.2 |
40.9 |
37.2 |
7.9 |
||||
Inflow netting (mil) |
28 |
34(LD) |
28 |
|||||
function |
Average desalinization rate (%) |
99.8 |
99.7 |
|||||
Mimi. Desalinization rate (%) |
99.7 |
99.5 |
||||||
Average boron removal rate(%) |
93.0 |
95.0 |
92.0 |
92.0 |
92.0 |
91.0 |
_ |
|
Water yield (m3/d) |
24.6 |
34.1 |
37.5 |
45.4 |
7.2 |
|||
Testing conditions |
Solution concentration mg/L |
32000 |
||||||
Operating pressure (MPa) |
5.52 |
|||||||
Test temperature (℃) |
25 |
|||||||
Single component water recovery(%) |
15 |
|||||||
Test liquid PH |
6.5-7.0 |
|||||||
Conditions of use |
Maximum operating pressure (MPa) |
8.27 |
||||||
Maximum inflow (m3/h) |
17 |
3.6 |
||||||
Maximum inlet temperature (℃) |
45 |
|||||||
Inlet PH range |
2-11 |
|||||||
Cleaning PH range |
1-13 |
|||||||
Maximum turbidity of water NTU |
1.0 |
|||||||
Largest water SDI |
<5 |
|||||||
Maximum water residual chlorine concentration( mg/L) |
0 |
|||||||
Mini concentration and yield ratio |
5:1 |
|||||||
Single film biggest pressure drop |
0.07 |